T8 ‘HIGH OUTPUT’ FOREST REPTILE LAMP (T8 하이아웃풋 포레스트 랩타일 램프)
도마뱀과 같은 숲속에 사는 파충류 종들은 낮은 수준의 UV-B를 필요로 하고 적당한 수준의 UV-B 6% D3 램프 아래에서 넓게 UV-B 빛을 받아야 합니다.
Arcadia Reptile D3 and D3+ T8 lamps have been specifically designed with the animals health in mind. We are proud to have the world’s highest output T8 lamps in a true 6% and 12% UVB. All of our UVB percentages are measured as part of the total output of light from the lamp and AFTER the all important first 100 hours of output. You can be rest assured that by using Arcadia Reptile D3 and D3+ lamps that you are providing the very best in T8 technology that money can buy. The Arcadia Reptile D3 and D3+ UVB lamps are effective to for one whole year and will keep your animal in tip top condition.
T8 reptile lamps are particularly useful for use in shallow enclosures and for those shade dwelling species and along with the use of the right reflector can produce a perfect environment for your pet reptile or Amphibian. Don’t forget to check out “lighting Guide” to make sure that you are using the right lamp for your species and more importantly your height of vivarium.
The Arcadia D3 Reptile lamp has a high UVA output (30%), providing all the elements which are so vital to the welfare of the reptiles. As a full spectrum lamp, the Arcadia D3 Reptile lamp simulates sunlight. This provides high colour rendering for enhanced viewing of your reptiles and their environment. The colour temperature of 6,500K replicates typical daylight conditions.
The Arcadia D3 T8 lamp can be used in conjunction with either the Arcadia Original Tropical or Freshwater High Output Fluorescent lamps to encourage good plant growth.
Arcadia D3 6% lamp and reflector | ||
---|---|---|
Depth | T8 – 26mm | T5 – 16mm |
10cms. | 141uw/cm2 | 289uw/cm2 |
20cms. | 74uw/cm2 | 145uw/cm2 |
30cms. | 45uw/cm2 | 83uw/cm2 |
40cms. | 28uw/cm2 | 56uw/cm2 |
Code | Watt | Length | Diameter | Lumens | Temp | UV-A | UV-B | Reflector* |
---|---|---|---|---|---|---|---|---|
FD314 | 14W | 15″/360mm | T8-26mm | 310lm | 6600K | 6% | 30% | ALR15 |
FD315 | 15W | 18″/450mm | T8-26mm | 300lm | 6600K | 6% | 30% | ALR15 |
FD318 | 18W | 24″/600mm | T8-26mm | 450lm | 6600K | 6% | 30% | ALR18 |
FD325 | 25W | 30″/750mm | T8-26mm | 850lm | 6600K | 6% | 30% | ALR25 |
FD330 | 30W | 36#8243;/900mm | T8-26mm | 1000lm | 6600K | 6% | 30% | ALR30 |
FD336 | 36W | 48″/1200mm | T8-26mm | 1200lm | 6600K | 6% | 30% | ALR36 |
FD338 | 38W | 42″/1050mm | T8-26mm | 1200lm | 6600K | 6% | 30% | ALR38 |
램프는 깨지기 쉬운 장비입니다. 반드시 형광램프의 안전한 장착 및 사용을 위해서 다음 단계를 따르십시오.
형광램프의 한 쪽 끝에서 두 개의 황동색 연결 핀을 볼 수 있습니다. 이 부분은 램프를 작동시키는 에너지를 전달하는 부분입니다. 이 부분은 본질적으로 깨지기 쉽습니다. 설치하시기 전에 두 개의 핀이 안전하게 램프 홀더 핀 소켓에 위치해 있는지 꼭 확인하시기 바랍니다. 정확하게 핀을 연결하지 않으면 핀이 휘어지고 끊어져서 램프 소켓에 램프를 더 이상 사용할 수 없게 됩니다. ULTRA - SEAL 램프 링은 반드시 램프홀더에서 풀고, 램프를 설치하기 전에 램프 핀이 제대로 장착 되었는지 다시 한번 확인하고 램프홀더에 설치하시기 바랍니다. 하이아웃풋 T5 램프 전선은 완전히 풀어서 사용하고 램프가 깜빡이거나 조명의 연결부분을 주의해야합니다. 또한 오랜 기간 동안 열을 받은 후에는 전원을 끄고 램프 링에 매우 적은 양의 바세린과 같은 물질로 기름칠을 하시기 바랍니다. 램프가 차가워진 후에는 2주에 1회 정도 램프 위에 쌓인 먼지를 젖은 천으로 깨끗이 닦으셔도 됩니다. 이렇게 하면 램프가 최대 출력을 유지하는 것에 도움이 될 것입니다. 모든 반사판도 동시에 깨끗하게 닦는 것이 좋습니다.